OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2ACD

Reductant Temperature Sensor B Circuit Range/Performance

P2ACD flags a reductant temperature sensor B reading that is electrically fine but disagrees with the other temperatures the SCR controller knows, typically checked after a cold soak, when DEF lines, tank and ambient should read about the same. No manufacturer publicly describes P2ACD. The sensor A counterpart shows the pattern: Deutz files P2043-64 as a plausibility error of the DEF temperature input, and Ford bulletin 18-2190 for the 2011–2015 6.7L Super Duty treats P2043 alone as a software case (PCM reprogram) and calls for a new heater and sender unit only when P205C or P205D appear as well. A B-side plausibility code without circuit codes therefore deserves a software check before parts are ordered. P2ACC, P2ACE and P2ACF cover the electrical faults.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / CD

Possible causes

  • Controller software with an overly tight plausibility check medium
  • Sensor B drifting from its characteristic medium
  • Line heater warming the sensor area during the check low

Symptoms

  • Check engine light after a cold start
  • SCR warning with no noticeable driving change

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2ACD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication