P2ACC
Reductant Temperature Sensor B Circuit
P2ACC is the general circuit code for a second reductant (DEF) temperature sensor outside the tank; the tank sensors have their own series (P205A ff. and P2ADA ff.). Sensor A, coded P2042 ff., is placed by Deutz in the SCR supply path (SPN 4337) and by Volvo and Mack in the DEF pump. Where a B sensor sits is left to the maker, and no manufacturer publicly documents P2ACC. The code captures circuit faults that do not fall clearly under the low or high codes P2ACE and P2ACF. CARB requires circuit monitoring for every input that feeds an emission control. Because DEF heating and the release of dosing depend on this temperature, an SCR warning and, if the fault stays, the usual inducement steps may follow.
Possible causes
- Connector of sensor B corroded by DEF residue high
- Damaged wiring between sensor B and the controller medium
- Defective reductant temperature sensor B medium
Symptoms
- Check engine light and DEF/SCR warning
- Countdown or speed limitation if the fault persists
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2ACC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.