P2ACB
Charge Air Cooler Coolant Temperature Sensor B Intermittent/Erratic
P2ACB covers a sensor B signal that jumps or briefly drops out instead of following the slow temperature changes of a coolant loop. The title, without the word circuit, also includes erratic values while the wiring stays intact. No maker publishes the B-side check. GM's 2025 diesel table shows how the A-side version (P00E2) works: it builds moving limits around the last good reading using the sensor's filter time and counts 60 failed samples out of 75 against them, Type B. A test of this kind only runs while no steady circuit fault is present, so P2AC9 or P2ACA take priority. Typical causes are a terminal with poor contact tension, a connector loosened by vibration or coolant that has crept into the plug. Wiggle the harness while watching live data.
Possible causes
- Terminal with weak contact tension in the sensor B plug high
- Harness rubbing through intermittently under vibration medium
- Coolant crept into the connector medium
- Sensor B element with unstable output low
Symptoms
- Check engine light comes and goes
- Sensor B value jumps in live data
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2ACB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.