OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2ACA

Charge Air Cooler Coolant Temperature Sensor B Circuit High

P2ACA is the opposite end: the voltage from charge air cooler coolant temperature sensor B sits above anything a real temperature would produce. For a thermistor input this looks like extreme cold and is typical of an unplugged connector, a broken signal wire, a lost sensor ground or a short to a voltage source. For sensor A, Ford's 2023 diesel summary sets P00E1 above 4.928 V, and GM's 2025 diesel table above 166,297 ohms, again as Type B. Nothing comparable is published for B. A frozen-looking reading may keep the low-temperature pump idle or make the module distrust the cooler, which on some engines means less boost. Check plug fit and corrosion first; with the two terminals bridged, the live value should jump to the hot end.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / CA

Possible causes

  • Disconnected plug or broken signal wire of sensor B high
  • Open ground or return line of the sensor medium
  • Sensor B element open internally medium
  • Signal wire shorted to a voltage source low

Symptoms

  • Check engine light on
  • Live data shows an extremely low coolant temperature for sensor B
  • Reduced boost on some engines

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2ACA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication