P2AC9
Charge Air Cooler Coolant Temperature Sensor B Circuit Low
P2AC9 reports that the signal of charge air cooler coolant temperature sensor B has dropped below its permitted window. These sensors are NTC thermistors, so a low signal stands for an implausibly hot coolant and usually means the signal wire touches ground or the element is internally shorted. Public limits exist only for sensor A: Ford's 2023 diesels flag P00E0 below 0.162 V within 5 s, while GM's 2025 diesel table reads resistance and fails under 70 ohms in 30 of 38 samples as a Type B code. A B-sensor check from the same maker is likely built the same way, but no document states it. With a false hot value the control may run the loop pump constantly or cut boost. Measure resistance at a known temperature and inspect the harness for chafing.
Possible causes
- Signal wire of sensor B shorted to ground high
- Sensor B internally shorted medium
- Coolant in the connector bridging the terminals low
Symptoms
- Check engine light on
- Live data shows an extremely high coolant temperature for sensor B
- Coolant pump of the loop runs constantly or boost is reduced
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2AC9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.