OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2AC8

Charge Air Cooler Coolant Temperature Sensor B Circuit Range/Performance

P2AC8 sets when charge air cooler coolant temperature sensor B delivers an electrically valid value that makes no sense for the situation, for example after a long engine-off period when every temperature in the engine bay should have converged, or when it fails to change while the loop pump runs and the cooler heats up. No maker documents this exact check publicly; Ford and GM only publish thresholds for sensor A (P00DE to P00E2). Besides a drifting sensor, the low-temperature circuit itself can trigger it: low coolant, trapped air or a weak electric pump make the reading real but unexpected. Check level and bleeding first, then compare B in live data with sensor A and with the engine's own coolant reading. Hard limits of the signal are P2AC9 and P2ACA.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / C8

Possible causes

  • Low coolant level or air trapped in the low-temperature loop high
  • Sensor B drifting out of its characteristic medium
  • Electric charge air cooler coolant pump weak or not running medium
  • Control module software needing an update low

Symptoms

  • Check engine light on, often only after several drives
  • Sensor B reads clearly different from sensor A after a cold soak
  • Higher intake air temperature under load

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2AC8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication