P2AC7
Charge Air Cooler Coolant Temperature Sensor B Circuit
P2AC7 is the general circuit fault of the second coolant temperature sensor in the low-temperature loop that serves a water-cooled charge air cooler. Where two sensors exist, one usually sits at the cooler inlet and the other at its outlet, so the module can judge how much heat the cooler removes; in GM's 2025 diesel table, sensor A measures the water entering the cooler. No manufacturer publishes a description of P2AC7 itself. The code covers faults that cannot be classified as clearly low or clearly high, such as a signal the module rejects as invalid; those two extremes belong to P2AC9 and P2ACA. CARB requires circuit checks for every such input. The driver may notice the warning lamp and, on some engines, reduced boost as a precaution.
Possible causes
- Loose, corroded or coolant-contaminated sensor B connector high
- Chafed or broken wire between sensor B and the module medium
- Internally defective temperature sensor B medium
- Faulty sensor input or reference in the engine control module low
Symptoms
- Check engine light on
- Implausible or missing value for sensor B in live data
- Reduced boost or power on some engines
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2AC7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.