P2AC6
Intake Air O2 Sensor Reference Voltage Circuit High Bank 2
P2AC6 indicates an excessive reference voltage on the intake oxygen sensor serving bank 2, as happens when the reference wire touches a supply or battery feed, when the sensor ground is open or when moisture bridges the connector pins. Like the other bank 2 codes of this group, it is not documented by any manufacturer; the basis is CARB's general rule that input components must be checked for out-of-range values in both directions. Ford's patents on intake oxygen sensing describe the sensor element and the reference-voltage operation that this check protects. Before replacing the sensor, unplug it and measure the reference lead against ground and against battery voltage with the ignition on. P2AC5 is the low side, P2AC2 the bank 1 counterpart.
Possible causes
- Reference wire of the bank 2 sensor shorted to a supply or battery feed high
- Open sensor ground medium
- Moisture bridging pins in the connector medium
Symptoms
- Check engine light on
- EGR on bank 2 reduced, NOx may rise
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2AC6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.