P2AC4
Intake Air O2 Sensor Reference Voltage Circuit Range/Performance Bank 2
P2AC4 marks an implausible but electrically intact reference voltage on the second-bank intake oxygen sensor. It is the bank 2 twin of P2AC0, which Stellantis documents for the four-cylinder Alfa Romeo 2.0L; an inline four with one intake path has no bank 2, so P2AC4 would only appear on engines fitted with a second intake sensor. No manufacturer documents this code publicly. A plausibility test of this kind typically compares the sensor reading with what EGR valve position, intake pressure and air mass lead the ECM to expect; Ford's patents show that pressure changes and humidity shift the output and must be compensated. Ageing, contamination from crankcase vapours or an overly strict calibration are therefore likelier causes than a broken wire. P2AC3 is the open circuit.
Possible causes
- Bank 2 intake oxygen sensor aged or contaminated by crankcase vapours high
- Calibration that judges the signal too strictly medium
- High resistance in the reference wire or connector low
Symptoms
- Check engine light on
- Usually no noticeable change in driveability
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2AC4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.