P2ABF
Intake Air O2 Sensor Reference Voltage Circuit/Open Bank 1
P2ABF points to an open circuit in the reference voltage line of the intake air oxygen sensor on bank 1. This sensor is a wide-band element placed in the intake tract, usually before the intercooler, that measures how much oxygen the incoming charge still contains and therefore how much exhaust has been recirculated. Ford's patent US8775011B2 describes it as a UEGO-type sensor that delivers either a pumping current or a voltage; a related Ford application reads the pumping current while a reference voltage is applied. With the reference lead broken, that loop cannot work and EGR control loses its feedback. No manufacturer documents P2ABF publicly; under CARB rules every engine input must be monitored for broken circuits. P2AC0 is the plausibility fault, P2AC1/P2AC2 low/high, P2AC3 bank 2.
Possible causes
- Broken reference wire or pushed-back pin between sensor and ECM high
- Corroded or loose sensor connector in the damp intake area medium
- Sensing cell of the intake oxygen sensor internally open low
Symptoms
- Check engine light on
- EGR runs without sensor feedback or is reduced, higher NOx emissions
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2ABF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.