P2ABA
Wastegate Position Sensor B Circuit
P2ABA covers a general circuit fault of the position sensor on the wastegate of turbocharger B, so it can only occur on engines with two turbos and electric wastegates: on a parallel layout the turbo of bank 2, on a series layout the second one downstream. Ford uses it on twin-turbo EcoBoost V6 engines. TSB 22-2357 reprograms 2021-22 F-150 2.7L trucks that log P2ABA, P2ABC, P2AB7 or P2AB9 because of software parameters; TSB 23-2353 and the later SSM 54083 cover 2020-23 Explorer, 2022-23 F-150 and 2023-24 Expedition/Navigator, first with a software update and then with the workshop manual pinpoint tests. No limit is published for this general code. CARB lists wastegate valve position among the data items an OBD system must report. Low/high are P2ABB/P2ABC.
Possible causes
- PCM calibration that sets the code falsely (Ford reflash for listed models) high
- Damaged harness or connector at the bank 2 turbocharger medium
- Electric wastegate actuator B with its built-in position sensor failed low
Symptoms
- Check engine light, on Ford also the powertrain (wrench) indicator
- Reduced power, boost limited
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2ABA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.