P2AB2
Catalyst Heater Control Module Supply Voltage
P2AB2 points to the power feed of the catalyst heater control module: the voltage it measures at its own supply input lies outside the window in which it may switch the heater. That window matters because these heaters draw several kilowatts; Vitesco's demonstration vehicle used a 4 kW disc, fed in 48-volt mild hybrids from energy recovered while braking, as DieselNet reports. Mitsubishi Electric's patent US5388404A shows the logic behind such a check: the controller first compares battery voltage with a reference and only then closes the heater current switch, guided by a catalyst temperature signal. No manufacturer documents P2AB2 publicly. A blown fuse, a corroded ground, a weak 48-volt battery or a faulty DC/DC converter are typical finds. P0562 and P0563 cover the general system voltage.
Possible causes
- Blown fuse or faulty relay in the heater supply high
- Corroded or loose ground or high-current terminal medium
- Weak 48-volt battery or faulty DC/DC converter in mild-hybrid systems medium
Symptoms
- Check engine light on
- Catalyst heating not available, higher emissions after cold start
- Further voltage-related fault codes possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2AB2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.