P2AAF
Diesel Fuel Presence Sensor Circuit High
P2AAF reports the diesel presence sensor signal stuck above its upper limit. Common reasons are a signal wire touching a battery-fed line, an open ground or signal path that lets an internal pull-up drive the input high, or a sensor with a failed output stage. No manufacturer documents P2AAF publicly, and no public source states which signal level stands for diesel. The background is spelled out in Ford patent US10544031B2: diesel is heavier and oilier than gasoline, and once in a gasoline engine it can block injectors and burn uncontrolled, so the patent aims to stop the refill before the tank is full. With P2AAF set, such a warning can no longer be trusted. CARB demands range monitoring of such inputs; P2AAE is the low side, P2AAC the general circuit fault.
Possible causes
- Signal wire shorted to a voltage source high
- Open sensor ground or signal wire medium
- Sensor output stage failed medium
Symptoms
- Check engine light on
- Misfuelling warning unreliable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2AAF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.