OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2AAD

Diesel Fuel Presence Sensor Circuit Range/Performance

P2AAD means the diesel presence sensor delivers an electrically valid signal whose content does not make sense: it may report diesel although no refuelling has taken place, never change at all, or contradict other information the engine computer has about the fuel. No manufacturer documents this code or its test publicly. Ford patent US10544031B2 illustrates the kind of cross-check involved in misfuelling detection: its pressure limit is not fixed but follows the pressure expected in the tank during that particular refill, so the verdict rests on a comparison instead of a single raw value. CARB requires such plausibility faults to be stored under their own code, apart from the circuit faults P2AAC, P2AAE and P2AAF. A contaminated or aged sensing element is a likely cause.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / AD

Possible causes

  • Sensing element coated with deposits or residues high
  • Sensor characteristic drifted with age medium
  • Calibration of the plausibility check not suited to the fuel quality in use low

Symptoms

  • Check engine light on
  • Unjustified misfuelling message, or a real misfuelling going unnoticed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2AAD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication