P2AAC
Diesel Fuel Presence Sensor Circuit
P2AAC is the general circuit fault of a sensor meant to recognise diesel where only gasoline belongs, so the system can react to misfuelling before damage occurs. No manufacturer documents this sensor or the code publicly, and its exact design is not described in sources available. Two Ford patents show why detection matters and how it can work without a dedicated sensor: diesel gives off far fewer vapours than gasoline, so tank pressure during refuelling (US10544031B2) or the warming of the carbon canister (US10611625B2) stays below the expected curve, while diesel in a gasoline engine can clog injectors and ignite uncontrolled. P2AAC applies when the sensor circuit fails in a way that is neither clearly low (P2AAE) nor clearly high (P2AAF). CARB requires circuit checks on such inputs.
Possible causes
- Corroded or loose connector at the sensor near the tank or fuel line high
- Damaged wiring along the underbody medium
- Sensor electronics failed medium
Symptoms
- Check engine light on
- Misfuelling warning unavailable or shown without reason
- Usually no change in how the engine runs
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2AAC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.