P2AA7
Engine Coolant Bypass Valve B Position Sensor Circuit
Thermal management modules on modern engines use motor-driven rotary valves to split coolant between radiator, heater, oil or transmission cooler and engine block. A position sensor reports each valve's angle so the module can regulate it in closed loop. P2AA7 is the general circuit code for the sensor of valve B, used when the signal is unusable but cannot be classed as low (P2AA9) or high (P2AAA). No manufacturer documents P2AA7 publicly, and what valve B controls differs between makes. GM's 2025 diesel tables show how such a sensor is read on valve C: digitally over SENT, with readings outside a fixed count window filed as low or high faults after 4 seconds in 5, Type B. CARB counts these cooling actuators among the monitored components. Expect slow warm-up or temperature swings.
Possible causes
- Loose, corroded or coolant-wetted connector, or damaged sensor wiring high
- Lost 5 V supply or ground to the position sensor medium
- Failed position sensor inside the valve module medium
- Faulty sensor input in the engine control module low
Symptoms
- Malfunction indicator lamp on
- Slow warm-up or reduced cabin heating
- Fluctuating or elevated coolant temperature reading
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2AA7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.