OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A9A

Alternative Fuel Tank Select Valve C Control Circuit Performance

With P2A9A, select valve C passes its electrical tests, but the effect of switching does not show up as expected. The likely evidence is pressure: once vessel C is selected, its own tank pressure sensor should begin to fall with consumption and the pressure ahead of the regulator should match that vessel's level. If tank C stays untouched, or the pressure jumps to a value that fits another vessel, the valve has not moved or leaks internally. Cespira's patent shows why the selection matters, since its controller decides which supply goes to compression and which to the regulator from measured supply pressures. A partial fault may only appear in the cold. No manufacturer publishes P2A9A or the comparison it uses; P2A46 and P2A47 cover the tank C pressure sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 9A

Possible causes

  • Valve C not shifting fully because of wear or contamination high
  • Internal leakage letting vessel C feed in the wrong position medium
  • Faulty tank C pressure reading misleading the check low

Symptoms

  • Malfunction lamp on
  • Tank C level hardly changes over a tank cycle
  • Fault appears mainly in cold weather

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2A9A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication