P2A96
Alternative Fuel Tank Select Valve B Control Circuit Performance
P2A96 is about tank select valve B working electrically but not doing what it is told. In an LNG layout like the one in Westport's US8726785B2, where one pump draws from either of two vessels through an insulated select valve, the module can verify the switch from the pump's behaviour: right after selecting a full vessel, the drive work per stroke should be normal, whereas a reading that stays low suggests the pump still sits on the empty side. The same patent warns that low work can also come from a mechanical defect, so a plausible check compares readings before and after the command. Cold-stiffened seals, ice and debris can hold the valve back. No manufacturer publishes P2A96 or its test window.
Possible causes
- Valve B held by ice or cold-hardened seals high
- Debris preventing valve B from shifting fully medium
- Pump defect interpreted as a select valve problem low
Symptoms
- Malfunction lamp on
- Gas supply drops right after a tank change
- One vessel stays full while the other runs dry
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2A96
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.