OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A95

Alternative Fuel Tank Select Valve B Control Circuit/Open

P2A95 says the module finds no proper current path through tank select valve B. Where a second select valve exists, it typically serves the next vessel or supply in line. Cespira's patent for a gas engine fed from two compressed-gas supplies shows how much depends on such valves: the controller connects each supply either to a compressor or to the regulator, and only by switching can it keep using a supply whose pressure has dropped. With valve B dead, that step is missing and fuel held in the affected vessel is effectively stranded. Unlike P2A22, which concerns the shutoff solenoid on tank B, this code concerns the routing valve. No manufacturer documents P2A95. A broken lead, a loose plug or an open coil are the usual findings.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 95

Possible causes

  • Loose plug or broken wire to select valve B high
  • Open solenoid coil of valve B medium
  • Output stage for valve B in the module defective low

Symptoms

  • Malfunction lamp on
  • Content of one vessel cannot be used
  • Range well below the usual figure

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2A95

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication