P2A92
Alternative Fuel Tank Select Valve A Control Performance
P2A92 is the functional check for tank select valve A: the wiring tests pass, yet the fuel system does not behave as if the commanded vessel were connected. Software can judge this only through pressures. A patent by Cespira, the Westport and Volvo venture, outlines the logic for two compressed-gas supplies with their own pressure sensors: a supply-select valve assembly routes one supply to a compressor and the other to the regulator, and stages change whenever a supply falls under a set pressure. After such a command the newly chosen supply should start to lose pressure while the other holds steady. If nothing changes, or the wrong tank empties, valve A is probably sticking or leaking across its seat. No manufacturer publishes P2A92 or a threshold for it.
Possible causes
- Select valve A sticking from dirt, ice or wear high
- Valve A leaking across its seat so both vessels are drawn medium
- Tank pressure sensor giving a misleading reading low
Symptoms
- Malfunction lamp on
- Tanks empty unevenly or in the wrong order
- Short gas supply although one vessel still holds fuel
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2A92
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.