OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A91

Alternative Fuel Tank Select Valve A Control Circuit/Open

A tank select valve decides which storage vessel feeds the fuel system. That sets it apart from a tank shutoff valve (P224C, P2A22 and onward), which simply opens or isolates one cylinder, and from the hydraulic fuel pump select valve (P2A70 and onward), which routes drive oil to a pump. Westport's patent US8726785B2 shows the idea with two LNG vessels and one external pump, where an insulated valve links the pump to either vessel. P2A91 means the control circuit of select valve A is open or otherwise faulty, so the valve stays in its rest position. Fuel is then drawn only from the vessel reached in that position and the rest may become unusable. No manufacturer documents P2A91 publicly; CARB requires output circuits to be checked for continuity.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 91

Possible causes

  • Loose connector or broken wire to select valve A high
  • Burnt-out solenoid coil of valve A medium
  • Faulty output stage in the alternative fuel module low

Symptoms

  • Malfunction lamp on
  • Only one tank is used, range noticeably shorter
  • Fuel gauge shows content left although the engine runs short of gas

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2A91

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication