OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A90

Alternative Fuel Pump C Performance

P2A90 marks pump C of the alternative fuel system as delivering too little. A third pump may belong to a further tank or, in Caterpillar's design US10060421B2, be one of several pumping elements driven in sequence. Besides wear, cryogenic pumps have a typical weakness that Caterpillar's patent US9228574B2 describes: if the liquid at the inlet has warmed enough to form vapour, the pump cavitates and delivery stops, so centrifugal designs need a positive feed pressure. Short bursts of poor output after long parking, with warmer LNG in the tank, fit this picture; a permanent shortfall points to worn parts. The pump diagnosis in US20080302111A1 explains how a slow pressure rise reveals the loss. No manufacturer publishes P2A90; P2A87 to P2A8A cover pump C's stroke valve.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 90

Possible causes

  • Vapour at the inlet of pump C after warm soak, causing cavitation high
  • Worn seals or valves in pump C medium
  • Clogged inlet strainer or filter ahead of pump C low

Symptoms

  • Warning lamp on
  • Weak pull or hesitation shortly after a long stop
  • Gas pressure recovers slowly after heavy acceleration

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2A90

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication