OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A8F

Alternative Fuel Pump B Performance

P2A8F applies to a second alternative fuel pump whose output has fallen short of expectations. Layouts with two pumps usually give each LNG vessel its own pump, a redundancy Westport's documents mention explicitly. In US20080302111A1, a selector valve decides which pump delivers, and once the controller judges one pump degraded it can switch to the other. The difficulty lies in telling a weak pump from an empty tank: Westport's US8726785B2 notes that little drive work per stroke can mean either a nearly empty vessel or a broken component such as the drive shaft. A P2A8F shortly after refuelling therefore points to the pump itself. Pump B may also be the healthy one, so check which tank was active. No manufacturer documents P2A8F or how its letter is assigned.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 8F

Possible causes

  • Worn seals reducing the delivery of pump B high
  • Tank served by pump B almost empty, mimicking a weak pump medium
  • Broken drive shaft or coupling between hydraulic drive and pump B low

Symptoms

  • Malfunction lamp on
  • Usable range shorter, fuel left in one tank
  • System changes to the other tank earlier than usual

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2A8F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication