OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A8E

Alternative Fuel Pump A Performance

P2A8E reports that alternative fuel pump A no longer delivers what it should, a mechanical or hydraulic fault rather than an electrical one. Such pumps move liquid fuel, typically LNG out of a cryogenic tank. A patent application now held by Cespira, US20080302111A1, shows how a controller can judge them from the delivery line pressure alone: each time the pump is commanded on, pressure has to climb from a lower to an upper set point within a known range of slopes. A clearly flatter rise means lost volumetric efficiency, and a falling pressure means the pump cannot even keep up with the engine. The document names worn piston seals, leaking static seals or check valves, dirt in the fuel and a weak hydraulic drive as causes. No manufacturer publishes P2A8E or its limits.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 8E

Possible causes

  • Worn dynamic piston seals in pump A high
  • Leaking inlet or outlet check valve of pump A medium
  • Hydraulic drive of pump A delivering too little force or speed medium
  • Impurities in the fuel passing the filter and damaging the pump low

Symptoms

  • Malfunction lamp on
  • Power loss at high load, gas pressure sagging
  • Pump runs noticeably longer to refill the accumulator
  • Engine switched to reduced output or diesel-only operation

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2A8E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication