OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A8B

Alternative Fuel Vaporizer A Performance

P2A8B means vaporizer A is not doing its job well enough, rather than reporting a wiring fault. On LPG engines this unit, also called reducer or converter, draws engine coolant heat to turn liquid gas into vapour at a steady pressure. Patent US7073489B2 explains the risk: evaporation chills the converter, the chill grows with gas flow, and an underheated unit can ice up until its regulator jet blocks. The AC STAG controller manual lets the system change to gas only after the reducer has warmed up and offers a pressure correction for a poorly performing reducer that floods the engine after overrun. Detection probably compares outlet temperature and gas pressure with expected values. No vehicle manufacturer documents P2A8B publicly.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 8B

Possible causes

  • Too little coolant reaching vaporizer A (air lock, kinked hose, thermostat stuck open) high
  • Worn diaphragm or seat in the pressure stage of vaporizer A medium
  • Oily residues from the gas clogging the vaporizer chambers medium
  • Outlet temperature sensor reading wrong but still within range low

Symptoms

  • Check engine or gas warning lamp on
  • System stays on petrol longer after a cold start or falls back to petrol under load
  • Hesitation, rough running or stalling after coasting on gas
  • Frost or condensation on the vaporizer body

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2A8B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication