P2A89
Alternative Fuel Pump C Compression Stroke Valve Control Circuit Low
P2A89 is set when the drive circuit of pump C's compression stroke valve reads low for the commanded state. Most often the control wire has found a path to ground, so the solenoid may stay on, or the coil has shorted turns and pushes the output stage into current limiting. A valve stuck in fill keeps pressurised oil behind element C; that element stops cycling, and the others have to carry its share. Expect reduced fuel delivery at high load rather than an immediate stall, at least on pumps with several elements like Caterpillar's design. No manufacturer publishes P2A89. Unplug valve C and check whether the short to ground remains in the harness; if it disappears, the coil is the likely culprit.
Possible causes
- Control wire of valve C shorted to ground high
- Shorted turns in the coil of valve C medium
Symptoms
- Warning lamp on
- Reduced power at high load
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A89
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.