OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A88

Alternative Fuel Pump C Compression Stroke Valve Control Circuit Range/Performance

P2A88 reports that the compression stroke valve of pump C works electrically but its effect does not match the command. In a sequenced multi-element pump, each activation should add a similar amount of pressure to the gas accumulator or rail; an element that keeps falling short, or whose share fluctuates, stands out against its neighbours. Since Caterpillar's patent sets stroke length through the duration of the command, a spool that opens late shortens pump C's stroke without any wiring fault. Deposits on the spool, a partly blocked oil passage or worn cryogenic seals are plausible causes. Because the other elements keep running, the driver may notice little apart from the warning lamp. No manufacturer publishes P2A88 or its thresholds.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 88

Possible causes

  • Deposits making the spool of valve C open late high
  • Partly blocked oil passage to element C medium
  • Worn cryogenic seals on element C low

Symptoms

  • Warning lamp after several drive cycles
  • Little noticeable change in driving

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2A88

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication