OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A83

Alternative Fuel Pump B Compression Stroke Valve Control Circuit/Open

P2A83 reports an open or otherwise faulty control circuit at the compression stroke valve of alternative fuel pump B. Whether a second pump exists depends on the layout: in Westport's patent US8726785B2, two LNG vessels each carry their own hydraulically driven pump, while Caterpillar's multi-element pump splits one unit into several separately switched elements. Either way, pump B's valve no longer admits drive oil, and its share of LNG delivery is lost. On a two-tank truck this can leave fuel stranded in the tank that pump B serves. The meaning of the letter B is not public, and no manufacturer documents P2A83. Where the valves are identical, swapping a connector with a neighbour shows whether the fault follows the coil.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 83

Possible causes

  • Open wire or loose connector at valve B high
  • Solenoid coil of valve B open medium
  • Output stage for valve B faulty low

Symptoms

  • Warning lamp on
  • LNG in one tank cannot be used
  • Reduced power under high load

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2A83

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication