P2A7D
Alternative Fuel Hydraulic Pressure Sensor Circuit High
P2A7D means the hydraulic pressure sensor reads above its upper limit, typically because the signal line is touches the reference or battery supply, or its ground connection is broken. Unlike P2A7C, this fault is obvious at once: a full-scale reading while the pump is idle or retracting contradicts every other input. Caterpillar's patent notes that a sensor in the return line can also serve to shift the directional valve, though the supply-side sensor is preferred at high hydraulic pressure; on systems that use the return value, a falsely high reading could therefore upset stroke switching. No manufacturer publishes P2A7D. See whether the reading changes with the plug disconnected, and test the ground circuit.
Possible causes
- Sensor ground open or high resistance high
- Signal line shorted to reference or battery voltage medium
- Sensor output stuck at maximum low
Symptoms
- Warning lamp on
- Erratic or stopped pump strokes
- Reduced power on gas
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A7D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.