P2A7A
Alternative Fuel Hydraulic Pressure Sensor Circuit
P2A7A is the general circuit fault of the alternative fuel hydraulic pressure sensor, a measuring point that the code list keeps apart from the hydraulic pump pressure sensor of P2A75. Where it sits is not defined publicly, and no manufacturer documents the split. Patents for hydraulically driven LNG pumps show the candidates: Caterpillar's US9228574B2 places one sensor in the supply line and another in the return line to the reservoir, while Westport's US8726785B2 suggests one sensor per side of the drive piston when pressure is taken at the drive unit. P2A7A is stored when the signal is faulty but fits neither a clear low nor a clear high case. Pump control then lacks one input and may restrict LNG delivery. P2A7C and P2A7D name low and high.
Possible causes
- Damaged connector or harness at the hydraulic sensor high
- Hydraulic pressure sensor faulty medium
- Fault in a sensor reference or ground shared with other sensors low
Symptoms
- Warning lamp on
- Reduced LNG delivery or power limitation
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A7A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.