OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A76

Alternative Fuel Hydraulic Pump Pressure Sensor Range/Performance

P2A76 is set when the hydraulic pump pressure reading looks electrically sound yet makes no sense for the operating state. Westport's patent explains why a fixed expectation is not enough: pressure rises with hydraulic pump speed, which follows engine speed when the pump is engine-driven, and with the LNG pressure the cryogenic pump works against. The controller therefore corrects its thresholds with a look-up table. A reading that stays flat while the pump strokes, shows no drop at stroke end, or disagrees with downstream fuel pressure points to a drifting sensor, but also to worn pump seals or low oil level. No manufacturer publishes P2A76 or its limits. Compare with a mechanical gauge on the test port and check the oil level.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 76

Possible causes

  • Hydraulic pressure sensor drifted high
  • Low hydraulic oil level or external leak medium
  • Worn hydraulic pump or drive seals medium

Symptoms

  • Check engine light on
  • Uneven LNG pressure or slow pressure build-up
  • Empty-tank warning although LNG remains

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2A76

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication