P2A75
Alternative Fuel Hydraulic Pump Pressure Sensor Circuit
In a hydraulically driven LNG pump system the controller watches the oil pressure delivered by the hydraulic pump. Westport's patent US8726785B2 places this sensor in the supply line between the hydraulic pump outlet and the hydraulic drive, using it for three jobs: reversing the drive at each stroke end, spotting an empty tank when peak pressure stays low, and flagging leaks or other abnormal conditions. Caterpillar's design likewise feeds supply and return pressure to the controller to shift its directional valve. P2A75 is the general circuit fault of this hydraulic pump pressure sensor. Without the signal, the pump cannot be cycled correctly and LNG delivery may stop. No manufacturer publishes P2A75; P2A77 and P2A78 cover low and high.
Possible causes
- Connector or harness at the hydraulic pressure sensor damaged high
- Hydraulic pump pressure sensor faulty medium
- Sensor supply or ground disturbed low
Symptoms
- Check engine light on
- LNG pump stops or strokes irregularly, gas pressure drops
- Dual-fuel engine runs on diesel only or with reduced power
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A75
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.