OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A70

Alternative Fuel Hydraulic Fuel Pump Select Valve Control Circuit

Some heavy-duty LNG systems do not drive the cryogenic tank pump directly but through hydraulics: an engine- or motor-driven hydraulic pump supplies oil to a reciprocating hydraulic drive on each tank pump. Westport's patent US8726785B2 shows two LNG vessels whose pumps sit inside the tanks, plus a selector valve that the controller switches to decide which pump receives hydraulic flow. P2A70 covers the electrical control circuit of such a select valve and is set when the driver output detects a general fault. If the valve cannot be commanded, the system may be stuck on one tank or lose LNG supply. No manufacturer publishes P2A70; CARB's heavy-duty rule requires output components to be monitored. P2A72 and P2A73 separate the low and high cases.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 70

Possible causes

  • Damaged harness or connector at the select valve on the frame high
  • Select valve solenoid coil faulty medium
  • Output stage in the controlling module faulty low

Symptoms

  • Check engine light on
  • Fuel drawn from one LNG tank only, range reduced
  • Loss of gas supply, dual-fuel engine falls back to diesel-only or derates

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2A70

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication