P2A68
Alternative Fuel Tank C Level Sensor Circuit Intermittent/Erratic
The last code of this block covers a tank C level signal that flickers: it is valid most of the time but suffers short gaps or jumps unrelated to fuel movement. On vehicles with three tanks the wiring to tank C is often the longest and has the most joints, each a chance for a loose crimp or green corrosion; frame flex can open a fractured conductor for an instant. Where the level is computed from CNG pressure, a flickering pressure input (P2A4A) can be the real source. No manufacturer documents P2A68; it parallels P2A63 for tank B and P01B3 for tank A, and CARB treats erratic inputs as part of component monitoring. Stored freeze-frame values plus live level data on a test drive narrow it down.
Possible causes
- Loose crimp or corroded joint in the long tank C harness high
- Conductor fractured, opening under frame flex medium
- Unsteady tank C pressure input behind a calculated level (CNG) low
Symptoms
- Tank C level jumps on the display
- Check engine light now and then
- Range display unsteady
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A68
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.