P2A67
Alternative Fuel Tank C Level Sensor Circuit High
P2A67 is the high-side partner of P2A66: the tank C level voltage lies above anything a correctly working sender outputs at full. An unplugged connector, a broken signal or ground wire and a short to a supply voltage all push the input there. Roush names such faults for the high case of its propane senders and notes for the second-tank code P2068 that only the primary tank is then shown; for a third tank no such public text exists, and no manufacturer documents P2A67. Since a believed full tank C could leave the driver stranded, the module drops the value rather than display it. Look for a connector knocked loose during tank service and check ground continuity from sender to chassis.
Possible causes
- Tank C sender plug loose or knocked off high
- Signal or ground wire broken medium
- Signal shorted to a supply voltage low
Symptoms
- Check engine light
- Tank C missing from the gauge
- Driver unsure about remaining gas
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A67
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.