OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A66

Alternative Fuel Tank C Level Sensor Circuit Low

P2A66 says the tank C level signal is below its lower electrical bound. With voltage-output senders that typically comes from a signal wire grounded somewhere along its route, a sender shorted inside, or a missing supply to a ratiometric Hall module such as those Rochester builds for LPG vessels, which needs a few volts to produce any output. The display consequence is an empty or missing tank C, so a driver may refuel early or think the gas supply is shorter than it is. No manufacturer documents P2A66, and since the petrol code family covers only two senders, the nearest documented relative is the tank B case P2A61. Disconnecting the sender should move the reading; if it stays low, trace the short in the harness.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 66

Possible causes

  • Tank C sender signal wire grounded high
  • No supply voltage at a Hall-type sender medium
  • Tank C sender shorted internally medium

Symptoms

  • Check engine light
  • Tank C displayed as empty
  • Refuelling earlier than needed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2A66

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication