OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A64

Alternative Fuel Tank C Level Sensor Circuit

A third gas tank, C, may have its own level input, either a real float sender in an LPG vessel or, on CNG, a value the module derives from that tank's pressure, the way Ford's 2003 bi-fuel trucks turned tank pressure into a gauge reading. P2A64 reports that the tank C level circuit is faulty without saying whether the signal is too low or too high; P2A66 and P2A67 make that distinction. Even the petrol-based code set ends at a second sender, so there is no conventional analogue for a third tank, and no manufacturer documents P2A64. The effect is mostly informational: the gauge or range shown may leave out tank C. Inspect the sender plug and its wiring run, which on rear-mounted tanks is often long and exposed.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 64

Possible causes

  • Long harness run to tank C damaged or plug loose high
  • Tank C sender defective medium
  • Fault in the tank C pressure input the level is derived from (CNG) low

Symptoms

  • Check engine light
  • Gauge or range leaves out tank C
  • Otherwise normal driving

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2A64

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication