OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A63

Alternative Fuel Tank B Level Sensor Circuit Intermittent/Erratic

Fuel slosh makes any level reading wobble a little, and modules filter that out. P2A63 goes further: the tank B level signal drops out or jumps in steps no filter can explain, then returns to normal. Contacts at the sender are the main suspect, since the tank sits low on the chassis and is exposed to spray and road salt; a cable pinched by a tank strap or a Hall module losing contact in its housing are other options. Rochester presents its contact-free Hall design as more reliable than senders with a sliding wiper, and a worn wiper track is indeed a classic source of such jumps. No manufacturer documents P2A63; on petrol vehicles the counterpart is P2069 for the second sender. Watch the level reading while rocking the vehicle and flexing the harness.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 63

Possible causes

  • Corroded contacts at the tank B sender from road spray high
  • Cable pinched by a tank strap medium
  • Worn wiper track or loose Hall module in the sender medium

Symptoms

  • Gas gauge for tank B jumps or briefly drops
  • Check engine light from time to time
  • Range display unsteady

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2A63

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication