P2A61
Alternative Fuel Tank B Level Sensor Circuit Low
P2A61 is stored when the tank B level signal falls below the smallest voltage the sender produces even with the tank empty. Roush's manual for its dual-tank propane trucks names a sender wire shorted to ground or a damaged sender as causes of the low case and adds that the second-tank code P2067 leaves only the primary tank on the gauge. A Hall-type float module with ratiometric output, such as Rochester's for LPG tanks, can also read low when its supply voltage is missing. The driver sees tank B as empty or ignored, and the usable range on gas appears shorter than it is. No manufacturer documents P2A61 itself. Check for chafed wiring near the tank mounting first, then measure supply and ground at the sender.
Possible causes
- Sender signal wire of tank B shorted to ground high
- Tank B sender damaged medium
- Supply voltage of a Hall-type sender missing medium
Symptoms
- Check engine light
- Tank B shown empty or left out of the gauge
- Shorter displayed gas range
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A61
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.