P2A60
Alternative Fuel Tank B Level Sensor Range/Performance
P2A60 flags a tank B level that is electrically valid but does not behave like a real fuel quantity: it fails to drop while gas is used from tank B, does not climb after filling, or swings wildly although the tank is at rest. Roush documents the stuck logic for its propane primary sender as P25B0, set when the value stays put over a considerable distance. On LPG the cause is often mechanical, a float arm bent or jammed inside the tank; with CNG, where the level is calculated, a drifting pressure sensor or a cold fill can mislead it, and GM notes that its gauge may read below full after refuelling in the cold. No manufacturer publishes P2A60 or its limits; CARB asks for rationality checks on such inputs. Compare the sender with the tank's own dial gauge.
Possible causes
- Float arm in tank B bent or jammed (LPG) high
- Pressure or temperature input behind the calculated level drifting (CNG) medium
- Contact resistance shifting the sender signal low
Symptoms
- Check engine light after several trips
- Gas gauge does not move as fuel is used
- Unexpected running out of gas
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A60
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.