P2A5F
Alternative Fuel Tank B Level Sensor Circuit
How the content of a second gas tank is measured depends on the fuel. CNG has no liquid surface, so the level is worked out from pressure, often corrected by tank temperature; GM's 2015 Impala Bi-Fuel shows full near 3,600 psi and empty near 400 psi. LPG, being liquid, allows a float whose magnet passes its position through the tank wall to a Hall element, as in Rochester's R3D dials. P2A5F is the general circuit fault of such a sender on tank B, without a low or high finding. No manufacturer documents P2A5F. Roush's propane trucks with two tanks use the petrol codes P2067 and P2068 for the second sender instead, and the gauge then shows only the primary tank. Start with plug, wiring and supply of the tank B sender.
Possible causes
- Plug or wiring of the tank B sender faulty high
- Tank B level sender or Hall module defective medium
- Reading module or data link to the engine module disturbed low
Symptoms
- Check engine light
- Gauge ignores the content of tank B
- Range estimate on gas too low
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A5F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.