P2A59
Alternative Fuel Vaporizer B Outlet Temperature Sensor Circuit Intermittent/Erratic
On heavy vehicles the gas hardware sees constant shaking, and long harness runs to the vaporizers add connectors that can loosen. P2A59 records that the vaporizer B outlet signal changed faster or more erratically than real temperature can, or kept dropping out for short moments. Such faults tend to come and go with road surface, engine speed or coolant heat. The A sensor gives a good reference: if its value is smooth while B jumps, the problem is local to the B circuit. Look for green corrosion at the pins, cracked insulation and strain on the plug. No manufacturer documents P2A59; CARB still requires that sporadic faults on an input like this are detected. Expect occasional switching to petrol or a flickering gas indicator.
Possible causes
- Connector of the B sensor loose or corroded high
- Harness damaged by vibration or strain medium
- Intermittent contact inside the sensor low
Symptoms
- Check engine light comes and goes, depending on calibration
- Sporadic switching to petrol
- Flickering gas indicator
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A59
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.