OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A55

Alternative Fuel Vaporizer B Outlet Temperature Sensor Circuit

A second vaporizer appears where one heat exchanger cannot supply enough gas, for instance on large or heavy-duty engines. On LNG trucks the job is harder still: Westport's patent CA2862664C starts from liquid near −160 °C, heats it with engine coolant and places a gas temperature sensor downstream of the exchanger to choose how the coolant flows. P2A55 reports a circuit fault of the outlet sensor on vaporizer B that the module cannot sort into low or high. For heavy-duty alternative fuel engines from model year 2018, CARB section 1971.1 lets each maker submit its own monitoring plan, which helps explain why public code lists are scarce; none documents P2A55. The intact sensor on vaporizer A helps as a comparison while tracing plug and harness of B.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 55

Possible causes

  • Plug or harness of the vaporizer B sensor damaged high
  • Vaporizer B outlet sensor failed medium
  • Fault in the sensor input of the control module low

Symptoms

  • Check engine light, depending on calibration
  • Reduced power or gas mode limited
  • Fall-back to the second fuel on dual-fuel engines

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2A55

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication