P2A51
Alternative Fuel Vaporizer A Outlet Temperature Sensor Range/Performance
P2A51 does not point to a broken wire: the outlet temperature of vaporizer A is electrically valid but does not fit the operating state. Typical tests compare it with coolant and ambient after a long stop, expect it to climb as the engine warms up, and expect a dip when heavy gas flow draws heat out of the unit. A value that freezes, drifts or lags badly fails such checks. CARB demands rationality diagnostics of this kind and wants them stored apart from circuit faults. The mounting point matters: US7073489B2 notes that coolant may be at 50 °C while the converter body runs near 5 °C, so a sensor touching the wrong part reads very differently. No manufacturer publishes limits for P2A51. If the sensor checks out, consider P2A8B, a vaporizer A that lacks performance.
Possible causes
- Sensor drifts or sticks at one value high
- Sensor badly seated or mounted at an unsuitable point medium
- Vaporizer A really too cold (low coolant, air in the circuit, stuck thermostat) medium
Symptoms
- Check engine light, depending on calibration
- Late or no switch-over to gas after a cold start
- Uneven running or hesitation on gas
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A51
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.