P2A50
Alternative Fuel Vaporizer A Outlet Temperature Sensor Circuit
A vaporizer, often called reducer or converter on LPG systems, turns liquid gas into vapour with heat taken from the engine coolant. The sensor in P2A50 sits on the outlet side of vaporizer A and tells the control unit whether that unit is warm enough. Patent US7073489B2 explains why this matters: with too little heat the liquid does not fully evaporate and can block the regulator jet. P2A50 covers any fault in this sensor circuit that the module cannot classify as low or high. No vehicle manufacturer documents P2A50 publicly; aftermarket controllers such as AC STAG show the same problem as a missing or shorted reducer temperature sensor. Until the circuit works again, the system will usually stay on or return to petrol.
Possible causes
- Plug or wiring of the vaporizer A outlet sensor faulty high
- Outlet temperature sensor of vaporizer A defective medium
- Input stage of the gas control module disturbed low
Symptoms
- Check engine light, depending on calibration
- Vehicle stays on petrol or switches back from gas
- Gas mode indicator flashes or stays off
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A50
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.