OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A4F

Alternative Fuel Temperature Sensor Circuit Intermittent/Erratic

Temperature changes slowly, so a gas temperature reading that leaps by tens of degrees within moments is not physics but wiring. P2A4F is set for such spikes and dropouts of the gas temperature signal, while P2A4D and P2A4E cover signals that stay out of range. Engine vibration and heat cycles near the regulator loosen terminals and crack insulation, which is why the usual finds are a connector with fretting corrosion or a wire that breaks inside its insulation only when bent. Short glitches may cause a momentary change back to petrol on bi-fuel vehicles. No manufacturer documents P2A4F; it matches P01B8 for the rail sensor and P0184 on petrol engines. Check the circuit with a meter while flexing the harness at the sensor.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 4F

Possible causes

  • Fretting corrosion or loose terminal at the sensor plug high
  • Wire broken inside its insulation near the regulator medium
  • Sensor element with intermittent contact low

Symptoms

  • Check engine light that comes and goes
  • Short switches to petrol on bi-fuel vehicles
  • Jumping gas temperature in live data

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2A4F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication