P2A4B
Alternative Fuel Temperature Sensor Circuit
Gaseous fuel changes density with temperature, so gas systems measure it to meter the right mass; Ford's 2003 bi-fuel CNG trucks, for example, use a thermistor at the rail for that density calculation and only switch to gas once both temperature and pressure allow it. The title of P2A4B names no location, which sets it apart from the tank temperature codes (P01AA ff.), the rail temperature codes (P01B4 ff.) and the vaporizer outlet sensors (P2A50 ff.). It is the general circuit fault of this gas temperature input, without a low or high verdict. No manufacturer documents P2A4B; Roush's propane systems report their fuel temperature under P0181–P0183 instead. Inspect plug, wiring and sensor resistance, since an NTC sensor can be checked against temperature with an ohmmeter.
Possible causes
- Plug or wiring of the gas temperature sensor faulty high
- Temperature sensor element defective medium
- Input stage or data link of the gas module disturbed low
Symptoms
- Check engine light
- Bi-fuel vehicle stays on petrol or switches back
- Rougher running on gas
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A4B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.