P2A4A
Alternative Fuel Tank C Pressure Sensor Circuit Intermittent/Erratic
Unlike P2A48 or P2A49, which describe a signal stuck out of range, P2A4A covers a tank C pressure value that flickers: brief spikes, gaps or steps that no gas cylinder could produce, since pressure in a large tank changes only slowly. Vibration is the usual trigger, acting on a connector with weak pin tension, a cable clip that has let go, or water creeping past a seal near the back of the vehicle, where tank C often sits. A sensor failing internally is possible but rarer. Because the defect often vanishes in the workshop, freeze-frame data and a road test with live readings help. No manufacturer documents P2A4A; it mirrors P2A45 for tank B and P01A2 for tank A, and CARB covers such erratic inputs under its component rules.
Possible causes
- Connector pins at the tank C sensor with weak contact high
- Water ingress at a connector seal medium
- Harness clip loose, cable rubbing medium
Symptoms
- Check engine light appearing occasionally
- Gas gauge jumps while driving
- No noticeable effect between dropouts
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A4A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.