P2A47
Alternative Fuel Tank C Pressure Sensor Range/Performance
P2A47 is not about broken wires: the tank C sensor delivers a voltage inside its window, yet the pressure it reports cannot be true. Plausible tests are a value that stays flat while the engine draws gas from tank C, one that does not rise during filling, or a clear gap to tanks A and B after a long rest, since cylinders on a common fill manifold settle to similar pressure. For scale, the bulletin SMB-169 that New Flyer issued for CNG buses expects the high-pressure gauge to read somewhere from 200 psi to 3,600 psi after refuelling. The cause can also be mechanical, such as a tank C valve that never opens (P2A27) or a closed manual valve. No manufacturer publishes P2A47 or its thresholds; CARB demands rationality monitoring of such inputs. Compare with a calibrated gauge before replacing parts.
Possible causes
- Tank C sensor drifted or frozen at one value high
- Tank C solenoid not opening or manual valve closed medium
- Corroded contacts shifting the signal low
Symptoms
- Check engine light
- Gas level shown does not match refuelling or consumption
- Shorter driving range on gas
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A47
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.