OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A46

Alternative Fuel Tank C Pressure Sensor Circuit

Larger CNG installations, for instance on trucks or buses, may carry three or more cylinders. Where a third one, tank C, has its own pressure transducer, P2A46 reports a general electrical fault in that sensor's circuit, stored when the module finds the signal unusable but cannot classify it as too low or too high. Publicly described is only the single tank sensor of simpler systems: Ford placed it inside the regulator of its 2003 bi-fuel CNG pickups and let the AFCM derive the gauge reading from it. No manufacturer lists P2A46. In practice the first checks are the three wires at the tank C sensor, the connector seal and the shared 5 V feed; the narrower codes P2A48 and P2A49 name a low or high signal, P2A4A short interruptions.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 46

Possible causes

  • Wiring or plug at the tank C sensor damaged, loose or wet high
  • Tank C pressure sensor faulty medium
  • Shared 5 V supply or sensor ground disturbed low

Symptoms

  • Check engine light
  • Remaining gas shown wrongly
  • Tank C may be left unused

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2A46

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication